The LED video wall screen is easy to use, but it should be maintained

LED electronic screen large screen like traditional electronic goods, in the process of using not only need to pay attention to methods, but also need to maintain the electronic screen, in order to make the LED electronic screen longer life. On the one hand, in order to control the production cost, the major manufacturers have reduced the material progress of the goods, resulting in the premature aging of a small number of accessories of some commodities; on the other hand, it is due to the improper use habits of users. The latter is more widespread. Here are 10 ways to maintain the LED full-color electronic screen.
1. Adhere to the full-color LED electronic screen large screen use the humidity of the environment, do not let anything with moisture properties into your full-color LED electronic screen large screen. Power on the large screen of full-color electronic screen which is rich in humidity will cause the parts of full-color display screen to corrode and form permanent damage.
2. To avoid possible problems, we can choose between forced protection and active protection, and try to keep the objects that may cause damage to the full-color electronic screen away from the screen. When cleaning the screen, we should also wipe it as gently as possible to minimize the possibility of damage.
3. Led full-color display screen is the closest contact with our users, so it is necessary to do a good job in cleaning and maintenance. Exposed in the outdoor environment for a long time, wind, sun, dust and so on are easy to show dirty. After a period of time, there must be a piece of dust on the screen, which needs to be cleaned in time to prevent dust from wrapping the appearance for a long time, affecting the viewing effect.
4. It is required that the power supply should be stable and the grounding maintenance should be excellent. It should not be used in harsh natural conditions, especially in strong lightning weather.
5. Water, iron powder and other conductive metal objects are prohibited in the screen. The large LED electronic screen should be placed in a low dust environment as far as possible. The large dust will affect the display effect, and too much dust will harm the circuit. In case of water inflow due to various factors, please cut off the power immediately and contact the repair personnel until the display board inside the screen is dry.
6. The switching sequence of LED electronic screen is as follows:
A: First open the control computer to make it work normally, and then open the LED electronic screen.
B: First close the LED electronic screen, then close the computer.
7. When broadcasting, do not stay in full white, full red, full green, full blue and other full bright pictures for a long time, so as to avoid the formation of excessive current, excessive heating of power cord, damage of LED lamp, and influence on the service life of electronic screen. Do not disassemble or splice the screen at will!
8. It is suggested that the rest time of LED screen should be more than 2 hours every day, and the LED screen should be used at least once a week in the rainy season. Generally, open the screen at least once a month and light it up for more than 2 hours.
9. The appearance of LED electronic screen can be cleaned with alcohol, or dusting with brush or vacuum cleaner, but not with wet cloth.
10. LED electronic screen large screen needs to regularly check whether it is normal operation and whether the circuit is damaged. If not, it should be replaced in time. If the circuit is damaged, it should be repaired or replaced in time. LED electronic screen large screen internal circuit, non professionals are forbidden to touch, to avoid electric shock, may cause damage to the circuit; if there is any doubt, please repair it by professionals.